The key to smooth air conditioning in the summer is to establish an HVAC preventative maintenance plan with the experts at Service Unlimited.
The sun is shining, the kids are out of school, and you’re already planning trips to the waterpark. That’s right, summer is just around the corner. Before you know it, you’ll need to blast the air conditioner on high, but before making that adjustment, you’ll need to perform some annual maintenance. This blog will uncover the secrets needed for you to get your HVAC system in peak form.
Summer Preparation for Your Commercial HVAC System
Most air conditioning systems sit idle during the winter, but when the weather starts getting warmer, the central AC unit becomes more than just a dust collector. This doesn’t mean you can immediately turn the system on full blast, though. That will only cause the equipment to work harder, resulting in higher energy bills, more frustration, and emergency visits from an HVAC technician.
To get your air conditioning equipment running optimally, you’ll need to design a preventative maintenance checklist with these critical steps:
Turn Off the Power
Safety always comes first, so make sure to shut off the cooling system’s power before performing any maintenance. Locate the service panel and flip the circuit breaker to shut off the condenser. Let the system sit for at least 30 minutes before taking the next steps.
Supply Clean Air Filters
Most HVAC systems are equipped with replaceable filters. Many times these filters can even be reused. Check each air-handler at least twice a year and remove any accumulated dust or debris. This helps create a healthier, more efficient airflow throughout the building.
Clean the Condensing Coils
It’s important to clean thoroughly behind the grills and fan blades of your AC system. This area covers the consing system, particularly its coils. These radiator-style fan blades rack up a tremendous amount of dirt and debris during the winter. If the coils remain clogged, it can cause your central AC system to circulate unhealthy air. Your HVAC provider will need to use a special refrigerator coil brush on a vacuum to gently clean out the condensing system.
Declutter the Rest of the Condenser
Once the coils are cleaned, you’ll need to get any excess debris or leaves out of the base of the condenser. It’s likely you’ll find weeds and vines in the system, so make sure to dispose of them. Later on, you’ll need to wipe down the blower’s fan blades and tighten any loose bolts or screws.
Inspect the Coolant Lines
After cleaning the condenser, make sure the refrigerant pipes get checked out. These tubes are typically covered with foam coolant insulation, which helps prevent energy loss. Take note of any punctured or missing layers of coolant. New insulation sleeves will be needed before turning the power back on.
Run the AC Units
The final step in the process is a test run. After cleaning out the system, rinse all parts with a hose and allow the unit to dry. Once the equipment is dry, you’ll need to flip the thermostat off and then turn the system’s power back on. Turn on the circuit breaker and immediately set the thermostat to a “cool” setting. If you find the AC system still isn’t running properly, you may need to schedule a repair with one of our experts.
HVAC Maintenance Done Right
When it comes to heating and cooling, the experts at Service Unlimited are the best team to work with. Whether it’s preventive maintenance, an installation, or an emergency repair, we have the tools and expertise to bring comfort into your building and cost savings to your energy bills. When you’re ready to tune up your air conditioning equipment for the summer, give us a call to schedule your annual maintenance checkup.